Produse pentru dispozitive și (40)

The GIGAFORTE 50 was specially developed for tests in the VHCF area. With a test frequency of 1000 Hz, tests with more than 100 million load changes can be carried out in a short time. Standard specimens and small components can be cyclically loaded in a force- or strain-controlled manner. Technical specifications: Max. Peak value of the force:50 kN pull / push Max. Amplitude of the force:50 kN (+/- 25 kN) Max static load: +/- 50 kN Dynamic way:0.2 mm (+/- 0.1 mm) Test frequency:approx. 1000 Hz (+/- approx. 3% depending on the specimen stiffness) Horizontal test room:400 mm Max. Vertical test space:330 mm (other dimensions on request) Control modes:Force or distance (acceleration-controlled vibration tests possible) Thread size samples:M 27 x 2 or smaller total weight:approx. 1200 kg Soundproof booth:is required!

This machine type is available in two force ranges; detailed information can be found in the prospectus. The load cell can be attached to the oscillating head or the machine table , depending on the application. The table with the T-slots also allows building components or extensive devices. The control is built into the machine and results in a compact and therefore space-saving solution. The machine is relatively light and can be easily transported and moved around the laboratory execution:5 oder 20 kN Max. Peak value:5 oder 20 kN Max static load:5 oder 20 kN Max dynamic load:+/- 2.5 oder +/- 10 kN Oscillation paths:4 mm Frequency range:40 – 250 Hz * Weight approx:600 kg * connection:230V / 10 A

The small testing machine can be used economically for vibrating small fracture mechanics samples or for quality monitoring of small parts during production. Because of the small footprint, the machine can also be used in "hot cells". With simple additions, the machine can then be operated with a manipulator. Max. Peak value of the bending moment:160 Nm Max. Static bending moment:100 Nm Max dynamic bending moment (+/- 80 Nm):160 Nm Dimensions depending on the add-on module:354 x 662 mm Weight:65 kg control:25 kg connection:230 V / 6 A

chambers RUMUL offers a variety of customer-specific solutions to test materials at elevated temperatures

The crack length measuring system FRACTOMAT is a system that works according to the indirect potential method, which is used for the exact measurement and control of the crack length and the crack propagation in fracture mechanics samples. The various interfaces allow use in any test set-up, including any other makes of testing machine. The transducer consists of a crack length measuring film (KRAK GAGE), which is glued to the specimen in an electrically insulated manner like a strain gauge and connected to the FRACTOMAT.

pneumatisches Schlauchquetschventil Schlauchquetschventil für nieder- bis hochviskose Medien - Besonders geeignet für Flüssigkeiten mit Füllstoffen - Min. Ansteuerdruck: 3.4 bar - Max. Materialdruck: 4 bar

Entdecken Sie unser umfangreiches Angebot an Verbrauchsmaterial für Dosieranwendungen: Dosiernadeln, PTFE und Metall, Zubehör wie Kartuschen, Kartuschenadapter, O-Ringe, Schläuche und Dosierpinsel.

An idea over forty years old to be able to carry out static tests on resonance testing machines in the fastest possible work steps has been implemented with a new, innovative special version of the 100-time proven testing machine RUMUL TESTRONIC. The possibility to directly combine dynamic vibration tests with static tests is particularly attractive. The oscillation of fracture mechanics specimens and the subsequent breaking open of the specimens without having to switch to another testing machine is an efficient and economical application of this special device TPP.

Für einfachste Dosieranwendungen mit Klein- und Grosskartuschen.

This machine type is available in several force ranges; detailed information can be found in the prospectus Executions:50 / 100 / 150 / 250 kN Nominal forces:50 – 250 kN * Oscillation paths:4 – 8 mm * Frequency range:40 – 270 Hz * Weight approx:3000 kg * connection:230 V 16 A oder 400V 16 A *